Product Detail :
|
Supply of 3.3/8"-3/5 inch tag perforation charges & accessories and 2 1/8" through tubing perforation charges & accessories 54 mm (2.1/8") strip carrier 0 deg. phased, well logging equipment, splice boot for lead wire.(100 nos./pkt), deto cord end seal, cased hole logging equipment,, hmx booster( bidirectional) for use in tandem gun, 3-3/8" (86 mm) blast sleeve, well logging explosives, detonating cord hmx 80 gr/ ft. rilsan/teflon or equivalent jacketed low shrink, well logging equipment, sdp tag charges, super deep tag charges, booster kit-for tag gun assy, detonators for tag gun-(fluid sensitive). adaptable to 80 gr/ft detonating cord. temp rating 325°f (163°c) min, rf-safe electronic detonators-fluid disabled-temperature resistant temp rating 325°f, 3-3/8"x 3.5/4 ft.(1m) 6 spf gun assy.-tag gun 3 3/8"(86 mm)- 3.5''(89 mm)od x 3.5 ft./4 ft./(1m) 6 spf- threaded type complete shipping /gun assy. for tag gun charges. ( includes scallop gun- 3.5 ft/4ft/1m, tube charge holder -3.5 ft/4 ft/1m, fixture alignment, snap ring, screw, cap etc.), 3/8"(86 mm)- 3.5''(89 mm)od x 7 ft.(2m) 6 spf- threaded type complete shipping /gun assy. for tag gun charges. (includes scallop gun- 7ft/2m, tube charge holder -7ft/2m, fixture alignment, snap ring, screw, cap etc.), 3 3/8"(86 mm)- 3.5''(89 mm)od x 11 ft.(3m) 6 spf- threaded type complete shipping /gun assy. for tag gun charges.( includes scallop gun- 11 ft/3m, tube charge holder -11ft/3m, fixture alignment, snap ring, screw, cap etc.), 3 3/8"(86 mm)- 3.5''(89 mm)od x 14 ft./15 ft./5m 6 spf- threaded type complete shipping /gun assy. for tag gun charges. (includes scallop gun- 14 ft./15 ft./5m, tube charge holder -14 ft./15ft /5m, fixture alignment, snap ring, screw, cap etc.) 3-3/8'' tag gun- tandem sub threaded type 3-3/8''(86 mm) tag gun- threaded type tandem sub o-ring set for top sub-3-3/8'' tag gun. 3-3/8'' (86mm) tag gun-o-ring set for top sub-details to be provided. g if top sub needs 2 o-rings, 1 set = 2 o-rings) o-ring set for bull plug-3-3/8'' tag gun 3-3/8'' tag gun-o-ring set for bull plug. details to be provided.(e. g if bull plug needs 2 o-rings, 1 set = 2 o-rings), o-ring set for tandem sub-3-3/8'' tag gun, 3-3/8''(86mm) tag gun-o-ring set for tandem sub. details to provided. (e .g if tandem sub needs 4 o-rings, 1 set = 4 o-rings) teflon lead wire assy. with contact spring-for 3-3/8'' tag gun contact holder (boot)-3-3/8'' tag gun, contact holder (boot) for teflon lead wire assy. with contact spring-3-3/ tag gun, 3-3/8'' tag gun top sub (firing head) go-type-, 3-3/8''(86 mm) tag gun-threaded type top sub (firing head) with tubular nut if any- go-type compatible with quick change assembly 3-3/8'' tag gun- bull plug/bottom sub, 3-3/8''(86 mm) tag gun-threaded type bull plug/ bottom sub, rf-safe electronic detonators-temperature- and pressure resistant- exposed to fluid & suitable to use with ttp. temp rating 325 °f. pressure rating 15000 psi., detonating cord/ charge 'clips' for fixing detonating cord with ttp charges during ttp gun assembly., part no. 7902737, detonator cord retainer, part no. 2329002, 2.1/8" charge tightening wrench for 0° phase ttp gun system part no. 2326021, deep penetration (dp) 53.975 mm (2.1/8")through tubing perforation system (zero degree phase) & accessories. accessories for above, 2.1/8 inch,54mm(max) through tubing deep penetration perforation charge, hmx 0° phased having the following specification , temp.rating 350°f (177°c) min. pressure rating 15000 psi (1057 kg/cm.sqr.)min. minimum acceptable performance in 5.1/2" cemented (concrete) casing per api 'rp-19b' recommended practice are as follows ehd(min.) = 0.28" (7.12 mm) min., t.t. penetration = 29"(736 mm) min. normalized to 5000 psi part no. 2810661, tandem connector for connecting the above 2.1/8" strip carriers. part no. 100005423, part no. 2323509 of dyna energetics europe gmbh 53.975 mm (2.1/8" od) firing head assy./top sub with thread connection to match with 2.1/8" / 1.11/16" mpd. part no. 2323470, nut & bolt for connecting 2.1/8" o.d. strip carrier to the firing head/top sub (one bolt and one nut consists of one set), part no. 100005517+100005519 of halliburton export inc, part no. 2819118 of dyna energetics europe gmbh, nut and bolt to connect strip carriers in the tandem part no. 2329001
|